Click here to edit subtitle

AdBlue Emulator is designed to disable AdBlue system used in trucks, buses and other heavy vehicles with EURO 4/5 exhaust emission rates. AdBlue Emulator Box bypasses electronic module of the AdBlue system on vehicle including Mercedes-Benz, MAN, Scania, Iveco, DAF, Volvo and Renault.
New Adblue Emulator 7-In-1 With Programing Adapte is designed to disable AdBlue system used in trucks, buses and other heavy vehicles with EURO 4/5 exhaust emission rates made by Mercedes-Benz, MAN, Scania, Iveco, DAF, Volvo and Renault.

AdBlue Emulator 7-In-1 Box Support List:

AdBlue Mercedes-Benz trucks and other heavy vehicles (not all, only with bosch adblue system);
AdBlue MAN trucks and other heavy vehicles;
AdBlue Scania trucks and other heavy vehicles;
AdBlue Iveco trucks and other heavy vehicles;
AdBlue Volvo trucks and other heavy vehicles;
AdBlue DAF trucks and other heavy vehicles;
AdBlue Renault trucks and other heavy vehicles;
Truck Adblue Emulator for Mercedez-Benz is to disable Bosch adblue system for Mercedes Benz only .

Its very easy to fit AdBlue Emulator Box to any truck or bus equipped with AdBlue system and it will override AdBlue system instantly, it will stop the usage of AdBlue liquid. AdBlue Emulator Box disables AdBlue system electronics gently so there will be no power loss of the engine or any warnings on the dashboard and in diagnostic system.


This device works without interfering to work of other electronic systems of the vehicle. AdBlue Emulator Box has a wide range of supported vehicle models and there is only one version of emulator for all supported trucks, just upload the necessary program to the AdBlue Emulator Box and you can install it on any supported truck.

Truck Adblue Emulator For Volvo is designed for disabling adblue system of Volvo heavy-duties.

Volvo AdBlue Emulator Wiring:


5 conductors:


1) RED(+15). To be connected to a 24V source enabled when the engine key is in the ON position. This connection will supply power to the minusble Module when the engine key is on(dashboard on).
2) BLACK(0V). To be connected to an earth.
3) GREY(+30). To be connected to a 24V supply always available to the existing adblue system (25A protection fuse and the adblue system).
4) WHITE(CAN H). To be connected to CAN H of the system.
5) BROWN(CAN L). To be connected to CAN L of the system. The connections must be made under the box of the connectors located on the chassis.

Truck Adblue Emulator For Scania is used to disable adblue system of Scania heavy duties.

SCANIA AdBlue Emulator Activation


The minusblue module and the original adblue module CANNOT both be activated at the same time, the GREY ACTIVATION WIRE(+30) is to enable the minusblue module working.

It is important to connect the GREY ACTIVATION WIRE(+30) to a 24V source always available(battery), moreover, the soldering operation must be done between the 20A fuse(F42) and the existing adblue module.

If you want to stop and exclude the original adblue module from working, all that needs to be done is to remove the F42 fuse before starting the engine.

The minusblue module will automatically be activated. To re-instate the original adblue module, all that needs to be done is to reinstall F42 fuse before starting the engine. The minusblue module will automatically be de-activated.
Truck Adblue Emulator For MAN is designed to disable adblue system used in MAN trucks, buses etc.

MAN AdBlue Emulator Self Learning:


When the minusblue module is fully connected to the electrical circuit of the original adblue module, and after identification of the F738 fuse controlling the power feeding to the original adblue module the truck batteries can be Re-connected.

The minusblue module aquires the inputs from the CANBUS the first time the dashboard is turned on(key on but engine still off).
1) Make sure the F738 fuse is inserted.
2) Turn on the dashboard(key on) and verify that the red led is on.
3) After approx 1 minute the red led will turn off and the green led will Turn on.
4) Switch off the dashboard(key off).